Fenix TK11 Black, R2 Edition [TK11B-R2] Fenix TK11 Flashlight The Fenix Tactical series (T) features a powerful, solid, durable, and waterproof design intended for rugged outdoor and military use. It's as solid as a tank. The TK11 can use either two CR123A batteries  (primary or li-ion) or one rechargeable 18650 battery with a protective circuit, and it maintains excellent constant brightness with two output modes: General mode, which can last for a whole night and can be used for general illumination, and Turbo mode, which can be used whenever high-powered light is needed - search and rescue, long-range target identification, etc. Two modes of output, selected by turning the bezel (Patented): Turbo Mode: Cree Premium (Q5) 7090 XR-E LED with lifespan of 50,000 hours 225 Lumens 2.7 hours (one 18650 Li-ion battery) 1.5 hours (two CR123A batteries) General Mode: Constant 60 Lumens 12 hours (one 18650 Li-ion battery) 10 hours (two CR123A batteries) Highly efficient polished & focused reflector - throws beam over 200 meters Digitally regulated output - maintains constant brightness Uses one 4.2V 18650 Li-ion, two 3V CR123A lithium batteries, or two RCR123A lithium-ion batteries. 135mm (L) x34mm (D) Made of durable aircraft-grade aluminum Premium Type III hard-anodized anti-abrasive finish 152-gram weight (excluding batteries) Waterproof to IPX-8 Standard Toughened ultra-clear glass lens with anti-reflective coating Tactical tailcap switch with momentary-on function Tactical removable grip-ring for cigar-hold technique Anti-roll, slip-resistant body design Included accessories: one holster, lanyard, rubber switch boot and two spare o-rings. This light is weapon mount compatible and has the option of the pressure pad for rifle mounting listed directly below Price $75.00 In Stock

Fenix TK-Series Remote Pressure Switch Fenix's TK-series remote pressure switch is specially designed for Fenix's tactical flashlights - TK10, TK11, TK20, and TK30.  It has four internal sensors with a steel spring-switch module for consistantly reliable operation.  The switch cable can extend up to 80cm and activates with just slight finger pressure. Specifications Pressure pad cover rated for 100,000 cycles, and switch rated for 1A electric current Switch cable made from resilient PU material; 23cm coiled, 80cm expanded Adapter tailcap made from T6-grade aluminum with type-III hard-anodized finish Waterproof to IPX-8 standard Complete assembly weighs 53.2 grams Compatible with TK10, TK11, TK20, and TK30 flashlights Price $25.00 In Stock

Fenix TA21 Tactical Light The Fenix TA21 is specially designed for flashlight fans, featuring multi-mode operation for your enjoyment, 18650 battery capability, and 7 days continuous runtime at 4 lumens of output. The TA21 uses the Fenix patented mechanical 360-degree revolving dimmer switch to precisely lock onto its twelve output modes. It can be powered by two 3V CR123A batteries or 1 18650 battery for long runtimes. The Fenix TA21 is your ultimate option for variable-output, power, and ease-of-use Features: Cree XR-E LED (Q5) with lifespan of 50,000 hours 12 output levels with revolving dimmer system With 2x 3V CR123A batteries: Mode 1 (4 lumens - 170 hrs) » Mode 2 18lumens - 37hrs) » Mode 3 (35 lumens - 18hrs) » Mode 4 (50 lumens - 12hrs) » Mode 5 (80 lumens - 7hrs) » Mode 6 (120 lumens - 4hrs) » Mode 7 (160 lumens - 2.5hrs) » Mode 8 (195 lumens - 2 hrs) » Mode 9 (225 lumens - 1.5 hrs) » Mode 10 - (230 lumens Strobe - 3 hrs) » Mode 11 (18 lumens Flash - 370 hrs) » Mode 12 (SOS - 30 hrs) With 18650 Li-ion with 2400mAh capacity: Mode 1 (4 lumens - 215 hrs) » Mode 2 18lumens - 48 hrs) » Mode 3 (35 lumens - 24 hrs) » Mode 4 (50 lumens - 16 hrs) » Mode 5 (80 lumens - 9 hrs) » Mode 6 (120 lumens - 5.5 hrs) » Mode 7 (160 lumens - 3.5 hrs) » Mode 8 (195 lumens - 2.5 hrs) » Mode 9 (225 lumens - 2 hrs) » Mode 10 - (230 lumens Strobe - 4 hrs) » Mode 11 (18 lumens Flash - 480 hrs) » Mode 12 (SOS - 40 hrs) Textured reflector - throws beam +200 meters Digitally regulated output maintains constant brightness Powered by 2 3V CR123A Lithium battereis Dimensions: Length: 168mm Diameter: 25.4mm Head: 35mm Weight: 168 g (excluding batteries) Reverse-polarity protection circuit board Made from durable aircraft-grade aluminum Type III hard-anodized anti-abrasive finish Waterproof to IPX8 standard Toughened ultra-clear glass lens with anti-reflective coating Tactical tailcap switch with momentary-on function Anti-roll, slip resistant body design Included accessories: lanyard, body clip, two spare o-rings, rubber switch boot Price $93.00 In Stock

Fenix TA 30 The TA30 is a solid, impact-resistant flashlight that features Fenix's revolutionary four-stage revolving dimmer system.  Powered by three CR123A batteries, the TA30 pumps out 225 lumens and will burn for up to 115 continuous hours.  For hunting, shooting, exploring, and searching, the TA30 is your best bet. The TA30 features Fenix's unique revolving dimmer system, a rotary interface that allows you to select the different modes of output easily and effortlessly.  The selector ring will rotate up to 90 degrees, which helps you to know which mode you are on even in dark environments so you won't have to play "roulette" when you go to turn on your light! Features Cree Q5 7090 XR-E LED with lifespan of 50,000 hours Four modes of output Low (9 lumens, 115 hours) Medium (60 lumens, 25 hours) High (225 lumens, 3.5 hours) Strobe (230 lumens, 7 hours) Constant current circuit to maintain constant brightness Powered by three 3V CR123A or 4.2V RCR123A batteries 200mm (L) x 35mm (D) Constructed from T6 aircraft-grade aluminum Durable Type-III hard-anodized, anti-abrasive finish 200g weight Waterproof to IPX-8 standards Toughened ultra-clear glass lens with anti-reflective coating Tactical tailcap switch with momentary-on function   Price $90.00

Streamlight TLR-1 Weapon Lighting System C4 LED technology, impervious to shock with a 50,000 hour lifetime LED Rating: Up to 7,000 candela peak beam intensity and up to 135 lumens measured system output. Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination Run Time: 2.5 hours regulated run time. Solid-state current regulation for consistent illumination level. Rail grip clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of muzzle Mounts directly to handguns with Glock-style rails and to all MIL-STD-1913 (Picatinny) rails. Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW Machined aluminum sealed construction with black anodized finsih Ambidextrous momentary/steady on/off switch Highly accurate sight repeatability when remounting Fits existing light bearing holsters 4.18 oz. Lithium Battery Notice under TECH DOCS IPX7 rated design; waterproof to 1 meter for 30 minutes. Dustproof. MIL-SPEC 810F Performance Tested Price $98.00 In Stock