|
|
|
|
SMITH TACTICAL RAM (Price
$295.00 shipped to your location) In STOCK
|
SMITH RAM Omaha Tactical is proud to distribute the Smith Ram. The Smith Ram
was developed for the Omaha Police Swat team in 1983. There are currently over 300 rams in service with federal,and local
law enforcement agencies throughout the US, South America, and France. The original unit manufactured for the Omaha
Swat team has been used in over 1000 documented high risk warrants, with little more than scratched paint and worn out foam
hand grips. The ram is 22 inches long and weighs 31 lbs. The shell of the ram contains a 5 lb. kinetic
hammer which slides forward when the ram hits the target. All units are assembled by hand, and rams can be ordered without
the kinetic hammer assembly. Other custom requests will be considered at no extra charge. If not in stock please
allow 30 days for delivery. For custom orders please contact Mike at msmith187@cox.net or 402-210-5404.
|
|
|
|
Mayflower Research Low-Profile Assault Armor Carrier Retail-$250.00
|
The Low-Profile Assault Armor Carrier is designed to provide the wearer with a high degree of mobility while providing an
acceptable amount of armor coverage. The hard armor plates are contained in pockets attached to the outside of the soft armor
carrier allowing the soft armor to mold to the wearers body for long duration mission comfort. The cumberbund is adjustable
to allow for climatic changes and also for girth adjustments for the wearing of side armor plates. The cumberbund has integral
pockets for 6" x 6" or 6" x 8" hard armor side plates. All materials and workmanship are 100% made in
the USA.
The Low-Profile Armor Carrier is available in the following colors: Coyote Brown: 500D solution
dyed Ranger Green: 500D solution dyed Crye Multicam: 500D ACU: 500D Black: 500D
|
|
|
Mayflower Research Low-Profile Armor Carrier Retail-$205.00
|
The Low-Profile Armor Carrier is designed to provide the wearer with a high degree of mobility while providing an acceptable
amount of armor coverage. The hard armor plates are contained in pockets attached to the outside of the soft armor carrier
allowing the soft armor to mold to the wearers body for long duration mission comfort. The Low-Profile Armor Carrier features
removeable ITW-Nexus Side Release Repair Buckles on the front of the vest to allow the individual to mount various chest rigs
directly to the carrier. This configuration allows the individual to use the same loadout with or without armor or have multiple
chest rigs configured for different mission requirements. All materials and workmanship are 100% made in the USA.
The Low-Profile Armor Carrier is available in the following colors: Coyote Brown: 500D solution dyed Ranger Green:
500D solution dyed Crye Multicam: 500D ACU: 500D Black: 500D
|
|
|
UW Chest Rig Gen IV Retail $185.00
|
The UW Chest Rig Gen IV is a low-profile mission focused vest built to be ambidextrous and designed to carry the following:
4 ea 5.56mm magazines, 2 pistol magazines, up to 2 small radios (PRC-152/MBITR) as well as two GP pockets. The H style harness
is removable via 4 one inch ITW-Nexus side release buckles and designed to be mounted to the front of the Low-Profile Armor
Carrier. Elastic is provided for cable management and antenna relocation. All buckles are ITW-Nexus IR and all materials and
workmanship are 100% made in the USA.
The UW Chest Rig Gen IV is available in the following colors: Coyote
Brown: 500D solution dyed Ranger Green: 500D solution dyed Crye Multicam hybrid: 330D & 500D ACU: 500D Black: 500D
|
|
|
United Shield Level III+ Hard armor plate (Price $305.00)
|
Description :
United Shield Delta+ Level III 10x12 Ballistic Plate The United Shield DELTA+ Level III+ Plates are constructed from Dyneema Polyethylene. Ergonomically
designed they afford the wearer excellent multi strike capability against a range of high velocity threats.
- Level: NIJ Level III+
- Material: Dyneema Polyethylene
- Size: 10x12
- Width:
26mm
- Weight: 4 lbs.
- Made
In England
ITAR Notice - Export
of the commodities described herein is strictly prohibited without a valid export license issued by the US Department
of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR). |
|
|
Tactical Molle Tourniquet Retainer (Price 5.00)
The
Tourniquet Retainer is designed to hold a CAT tourniquet in a simple but durable shock cord retainer utilizing any available
Molle webbing space. All materials and workmanship are 100% made in the USA.
The Tourniquet Retainer is available
in the following colors: Coyote Brown solution dyed webbing Ranger Green solution dyed webbing Crye Multicam
webbing ACU webbing Black webbing
|
Military Grade IFAK first aid kit (Price 49.50) In
Stock
The IFAK, Individual First Aid
Kit, as issued by the USAF in Iraq. The kit consists of a folding insert pouch wich is attached by a cord to the carrier pouch.
The folding pouch has elestic straps and vented compartments to keep the contents in place, even in case of leaving in a hurry.
The pouch is made of Cordura nylon in three-color desert, with M.O.L.L.E. straps. The IFAK measures 8"x6"x4", it is a compact and lightweight pouch, the complete kit weights 1.6 lbs. The
FA 187 contains all the essentials for wound management. NSN: 8465-01-251-3772 (click images to enlarge) The
kit comes shrink wrapped with content list and the NSN of each component.
Contains 11 items, including: | - 1 | Israeli Field Dressing, 4'' | 6510-01-460-0849 | | - 2 | Sterile Crinkle Cottons | 6510-01-503-2117 | | - 1 | Bandage, Self Adherent,
3''x5yds. | . | | - 1 | Triangular
Bandage | 6510-01-525-3695 | | - 1 | Lip
Treatment | 6508-01-436-0607 | | - 1 | QuickClot,
Package, 50grams | 6510-01-519-3085 | | - 1 | EMT
Shears, 7.25'' | 6515-00-935-7138 | | - 1 | Tape,
Adhesive, 1''x10yds. | 6510-00-926-8882 | | - 1 | Tourniquet | 6515-00-383-0565 | | - 1 | Pair of Nitrile Gloves | 6515-01-519-9161 |
|
|
|
OPS Chest RIG ( Price 35.00) In Stock
|
Description :
- Heavy webbing
for modular attachment. - Swivi Lockster - Swivel Push - Button Release Buckle. - Two grommets for drainage. - Padded cross-back shoulder strap with
webbing and D-ring. - 7" x 11" map pocket with inernal hook & loop panel. - Additional mesh back pocket. - Two open - top mag pouch (one on each
side) Size : One size fits most
Color : O.D, Black, Coyote, ACU
|
|
Base II Zip pullover (Price $22.00)
Description : - Highly
breathable grid fleece. - Flat seam construction. - Mid chest zipper converts to turtle neck. -
Sleeve with thumb hole
Size : (S), (M), (L), (XL), (XXL) Color : O.D.
BK, Coyote Tan
|
|
|
|
|
|
|